Aqua 7, Pre-Installed 6 × 120mm PWM ARGB Fan, ATX Mid Tower PC Case, Computer case with Panoramic View Tempered Glass Front & Side Panel, Type C Port, Gaming PC Case, Black

I'm writing this review because this is a great PC case and you're probably reading this review because it's under $100 and you want one. Great news for you because this case has what you need without the premium price. The big draw is the 6 RGB fans that come preinstalled. The fans are quiet and they cool nicely and if RGB is your thing, that look nice too. The case has a button next to the power button that lets you cycle through different colors and thankfully you can also turn them off if you don't care for the light show. The case has a hub on the back that has all the fans connected to it, so all you have to do is tame the ball of wires that come from all directions. Good luck to you! Another draw to this case is that it's a fish tank that's so trendy these days. There's a metal hard drive bay next to the PSU slot to put a HDD which can be moved further into the case if your PSU is too long like mine is and there's two slots for SATA SSDs about mid-right of the back of the case. The top of the case is roomy and there's plenty of space for 360mm AIO and there's no worry slotting in those giant GPUs; there's plenty of room for them in this case. Of course, to keep the price under $100 it had to cut some corners. The only real problem for me is that the filter for the PSU is absurdly inadequate. It's less a filter and more of a square cut from a window screen and the inserts on the case to put it in place are simple clips that are hard to put on even while looking at them. I was having trouble putting the filter back on while the case was empty and I had the thing upside down looking at it straight on; now imagine trying to remove the filter, clean it, and put it back on while the case is sitting on the desk. This is the only major screw up as far as I'm concerned. The filter at the top of the case is more or less the same however it has a magnetic border all around it, so there's some weight to it and stays in place nicely. Another drawback is that the holes don't have grommets for cable management; your cables are simply going to stay at the bottom of the holes. Not a deal breaker but you should know what you're getting into. This last one may or may not affect you. Instead of the power button being at the top of the case it's at the bottom near the front. If your case is sitting on your desk this is great; it's at desk level, just reach a little to the right and your PC is on! But if your case is under your desk you're going to have to reach further down to turn it on every time. I upgraded from a case that only had five fans and poor ventilation for high-end parts and when I changed to this case I saw my temps lower by 20 degrees Celsius. That's an amazing improvement! The case is so roomy that I won't have to worry about future upgrades not fitting for the foreseeable future so I'm staying with this case for a long time through multiple builds.

Pros: Case looks great, plenty of internal room, more than enough fans pre installed, great airflow, removable hdd cage, and fans have a decent color as well. Cons: Fans are a bit loud and the back of case doesn't have the most room for cable management If you plan on setting it up with an air cooler like me I suggest moving the bottom fans to the top to exhaust heat and flip the fans towards the front of the case around so they intake cooler air giving you positive air pressure. Overall great value for the overall performance especially coming with 6 fans argb fans preinstalled.

First off, the build quality of this case is awesome, and you get 6 rgb fans included, which can be customized to however you want using any rgb control software. Also, you get a RGB hub on the back panel that will take 6 rgb fans. So you’re good to go with the included fans. This case can actually 9 fans total (two in the front, three in the bottom, one in the back, and three on the top). You get tempered glass front and side panel, which is awesome. Also super easy to pop them off and on. Literally takes 10 seconds to do both. Also, every pc components fit perfect. The motherboard lines up with the mounting holes/standoffs perfect. My ASUS TUF 4060ti GPU fits in the case with plenty of room, and I’ve also verified that a 7800xt will also fit, but sadly I had to RMA the 7800xt because it was defective and it didn’t allow my pc to post or boot at all. You also get a couple black zip ties, which definitely comes in handy. The case feels solid, it’s got some weight to it, which is nice. One downside is the fans can get pretty loud, and sound deadening isn’t too good, there’s plenty of ventilation which is good, but that means more noise will escape the case. You will want to get some sort of fan controller software to control the fan speeds to your liking, it will have to use you M/B BIOS. I recommend “Fan Control” software. It’s free, and easy to use. Great buy!

This is a beautiful case that fits nicely on my desk. It comes with 6 LED large fans installed and ready to go. The front and side panels are made from tempered glass, and with the LED lights on... everything looks great inside. I deducted 1 star due to a couple of issues that I ran into... Issue 1 - In order to install a standard ATX motherboard, and plug cables into the pins, you have to remove the 3 fans at the bottom of the case. If they could have moved the bottom fans down half an inch or so, then it wouldn't have been so difficult to get to the bottom part of the motherboard to screw it into the case, or to connect any of the cables along the bottom of the motherboard. Issue 2 - The case has little to no room on the back to run cables. It was difficult to do cable management. Even when you get the case and all the fan cables are looking like a bowl of spaghetti... Like other users have posted, the back cover bulges a little as it tries to compress all the cables at the back of the case. Issue 3 - The case supports 2 SATA 3.5 inch drives, but it is weird how they are installed. There is a HD bracket located on the bottom of the case right next to the power supply. This bracket has 1 slot for sliding in an HDD and you are able to screw it in place on the sides. In order to get the 2nd harddrive installed... You have to remove the 1st drive from the bracket, place the HDD on top of the bracket, and then screw it into place by screwing screws into the bottom of the hard drive.... In the decades that I have been building computers, this is the first time that I had to screw any harddrive by using the bottom of the drive. Also if anything happens in the future and you need to have this drive replaced... there is no easy way to unplug it and swap the drive.. You have to remove the mounting bracket.. remove Drive 1, and then replace Drive 2. Conclusion. This is a great looking case!!.. If you are building a simple machine with SSD or NVME drives, then you will not have any issues... But if you are a hardcore computer developer/hacker that likes lots of storage.. then this case is not the one for you.

This case is amazing and I don't think I can say a single bad thing about it. Here are just some amazing things I found may not be noted in the description. (Anything with ** is a tip for new builders or may just help solve a problem your having) -Fans are quiet and ARGB is controllable with apps like Signal RGB to sync with other components in your build. In my case I got my Gigabyte 2080 and my Rog Strix mobo to sync perfectly with the fans -The top of the case has a magnetic dust filter -Pcie slot covers ARE REUSABLE! :D (always love to see that) -Fans are easily removable ( **If you are using a atx mobo like me you might have to temporarily unscrew the left and middle bottom fans to screw ur mobo in and plug in what you need down there. Its not that much of a hassle**) -Ample room for back cable management **or shove your cables if you have a non modular power supply** -If your having second guesses because of the bottom fans don't worry. They actually have pretty good airflow. -Case comes with very clear labeled atx, matx, and itx mobo standoff locations. ATX ones are already preinstalled! I really really recommend this case to people who want a GREAT looking case with amazing airflow for the best price for something like this at just 75$

Bought this case to upgrade my old 5 year old case I’ve been itching to get rid of and finally was able to get my hands on this! What caught my eye was the reviews on this and the look to this case and it didn’t disappoint. It fit all my components from my new GPU to my newly installed 10 fans I’ve installed having no issues. The features to this are nice with ports on the side of the case and lots of ventilation (no issues with components heating up) It came in tact with no issues to damage or scuffs when opened and brought out of its box either and the glass is a great touch to this case. I suggest buying it for the price that it’s at if you’re looking into a decent quality case.

Well worth the money. The PSU shroud having cutouts really helps with the airflow, which this case achieves a lot of with its five intakes. The fans are real ARGB and run pretty quiet. Cable managing is sufficient, but there's some instances where it can feel a bit tight. Primarily with the bottom intake fans, you might run into some issues plugging connectors to the bottom of your motherboard because the fans are in the way. Except for that small caveat, the case is a super simple to build in and offers great quality for its price.

Second pc I built myself, decided to take this new brand for a spin instead of the “meta” case from all of the other name brands. I can say for certain that I was thoroughly impressed. If I can say one thing, when you first boot this case up the fans can be just a tad bit loud(granted for me this didn’t matter). As far as cable management is concerned, the hub of fans were properly organized prior to doing my own cable management. My ONLY complaint would that the plugs that go at the bottom of the bottom of the motherboard can be a a tad bit tight to get them in due to how close the fans are (which the bottom fans already have a mounting place so they cannot be adjusted as far as placement ) Other than that, it’s a nicely designed case. For less than $100 you get a nice looking case, a lot of airflow and rgb fans for those who love it, supports large GPUs. Easy to work on, I definitely would suggest this case to everyone wanting to build their pc, helps either the budget as well