PC CASE ATX 9 PWM ARGB Fans Pre-Installed, Mid-Tower Gaming PC Case, Panoramic Tempered Glass Computer Case with Type-C,360mm Radiator Support (H9)

This was my Christmas present from my wife and kids and wow what a present it is, i have moved from a Riotoro Morpheus to this new case. The moving of components was fast and easy and the results afterwards speak for themselves This case deserves to be advertised a lot more than it is and with a lot more hype The Pros: The Price for this case is phenomenal, they paid £120 for this case and that compared to NZXT H9 starting price of £170 is an absolute bargain Build Quality for the price is excellent, strong, sturdy and elegant double glass design this case takes a 360 rad in 3 positions top, bottom and back panel, they purchased me a Thermalright Notte 360 AIO, i replaced the Thermalright fans with the case fans so all fans matched and the temps are very when idle 35 Degrees C and Max of 75 Degrees C when on full load the Fan noise is almost none existent, running them on MAX and they are a very low hum, my RX 6900-XT fans produce more noise than the case fans Lighting control is great, if you do not have an ARGB header on your motherboard then you are supplied with a remote control as well as secondary button control placed next to the reset button. The remote allows you to cycle through 12 base colours as well as allowing you to change through 5 speed settings and countless modes. If you do have an ARGB Header on your motherboard then your motherboards supplier will have their own software with a multitude of colour options available. The case allows vertical placement of your graphics card As with every product there are always some cons The Cons: Cable management is not the best, it could do with the shield to close off the cables in the second compartment but there are lots of tie points and if you do it right it looks clean and tidy Pop Outs for graphics card placement, this took me back to the 90's with PC builds, i wasn't bothered with popping out the slots but i know a lot of people like to have the slots that can be replaced if selling on the case etc more ARGB splitter cables as i had to split it 3 times from the motherboard for the AIO Fans, Case Fans and Graphics card and as you see from the picture i couldn't take the cable for the Graphics card under or around i had to cross over because the ARGB just wouldn't reach (i have ordered an additional slitter cable which is long) The fans have no rubber corners so i will guess over time that there will be some noise that will come off the fans as the screws loosen slightly with usage. Finally although you can place your graphics card vertically there is no PCIE extension cable or support arm provided with the case (i will have to look for some aftermarket options if they are available) All in all this case is a top contender and it goes to show that you do not need to pay extortionate prices for a quality product

Looks fantastic with all the fans going. Tonnes of space for your customer build and not as noisy as you'd expect which is great as its being used for a recording studio. Good value for what you get in the case and cable management can be as tidy or as messy you want. Has some standoffs reinstalled for standard size motherboards with extras provided if you need them and comes with mounting screws for the motherboard. Power button is only two pin so might need to play about a bit with it depending on what motherboard you use. Removed 1 star due to door hinges not being as secure as they should or could be - resulting in the door almost breaking my toe. Overall a good case and get quite a lot for the money.

The AMANSON PC Case ATX (H9) is an excellent choice for gamers and PC enthusiasts looking for both aesthetics and performance in their builds. With 9 pre-installed PWM ARGB fans, it ensures excellent cooling while offering customizable lighting effects to match your setup. Panoramic Tempered Glass Design The panoramic tempered glass side panels provide a sleek, modern look, allowing you to show off your components and RGB lighting. The glass is durable and gives your PC build an elegant, high-end appearance, perfect for showcasing your system. Superior Cooling and Airflow This case comes equipped with 9 ARGB fans to provide optimal airflow and cooling performance, even during intense gaming or heavy workloads. Plus, the case supports a 360mm radiator, allowing you to integrate advanced liquid cooling systems for even more efficient temperature management. Easy Accessibility and Versatile Layout With the inclusion of USB Type-C, you'll have modern connectivity options for fast data transfer. The layout is designed for easy cable management, ensuring your build remains clean and organized. Final Thoughts The AMANSON H9 PC Case combines superior cooling, great aesthetics, and easy accessibility, making it perfect for any gamer or PC builder looking to create a powerful, stylish system. With the pre-installed ARGB fans and panoramic glass, it’s an outstanding choice for those who want both performance and a visually appealing setup.

Great pc case plenty of room although i think the designers need to re think the position of the fans at the bottom of the case because when connecting the cable for the usb 3.2 it is very tight as the fans are so close to the connector, also the last time i bought this case there was a RGB fan hub and remote included inside the case but wasnt this time hence the 3 star, so the RGB's for the fans are connected direct to the motherboard. Other than that its a good pc case... (bought it twice now lol)

First of all it is not compatible with at least some ATX motherboards. Mine is MSI Tomahawk. Well, it is but if you want to use any connectors on the bottom of your MB you'll need to remove 2 bottom fans... And if you want to install anything network card into PCI_E4 - you won't be able as the card is not going into the slot completely due to a pin on the oter side. Plus, well, did not realised it when ordered the case, the CPU literaly lies on the PSU. Haven't tried to switch the computer on yet to check the temperatures but something tells me the results will be devastating.

This case is stunning. It's easy to work with, and the hard drive/sata tray is thoughfully designed. Honestly, looks beautiful! Future ref, it would be good to have the case USB 3.0 motherboard connector 90 degree angled... as straight makes it next to impossible to install, especially with the fans at the bottom where my header is.

I Love this case even tho it is not come with fans , I brought some separately and I’m telling you I was able to fit in all six fans ,. This case is perfect for any gamer

No funciona para ATX.

Metal is a little thin but not in an awful way. Matte finish scuffs easily but paint seems durable. Mine came with broken front glass and amazon got me a replacement case shipped out immediately. I built in the original and swapped out the front glass. The fans are quiet, nice and bright and move decent amount of air but all fans moving air out of the case was a problem. I turned the top fans over to create some type of intake. I did the top fans for aesthetic reasons. To keep the easily seen fan faces showing. Not the best setup for thermals, flipping bottom fans would have been better but would have looked worse. It works well and looks amazing. Gets a lot of attention.

Très bon produit,bonne qualité et un espace pour toute config !

Lots of space for a clean setup. The quality of the case is excellent, with a very sturdy metal case, good quality ports and I/O, cable management compartment, hard drive mounts, and plenty of fans. For an RGP setup it is a killer look. I chose to vertically mount my GPU. I think the back panel metal could have been a little thicker, especially around the PCI ports, as it is slightly flimsy - but it works. The fans provided are of a 10 pin variety, and can sync to aura sync, but it's not obvious how to enable this (push the on button twice to toggle between motherboard and hub control). Due to the 10 pin connection, it's difficult to find replacement parts for the fans. Overall, excellent value.

Il case Amanson H09 è una scelta fantastica per chi cerca una custodia da gaming che unisca estetica e prestazioni. Con 9 ventole ARGB preinstallate, offre una gestione del flusso d'aria eccellente per mantenere il PC fresco anche durante le sessioni di gioco più intense. Le luci RGB sono facilmente personalizzabili, aggiungendo un tocco spettacolare al tuo setup. La struttura in doppio vetro temperato permette di mostrare l'interno del PC in tutto il suo splendore, dando un aspetto pulito e moderno. La compatibilità ATX Mid Tower è perfetta per l'installazione di componenti ad alte prestazioni, e c'è ampio spazio per GPU, dissipatori e altre periferiche. L'assemblaggio è semplice grazie a una buona disposizione interna e a un cablaggio ben organizzato. Inoltre, il case è ben costruito, robusto e offre un buon accesso per l'installazione e la manutenzione dei componenti. Se stai cercando un case funzionale, ben ventilato e visivamente accattivante, il Amanson H09 è un’ottima scelta!