FLASHFORGE Adventurer 5M Pro 3D Printer, One-Click Auto-Printing Max 600mm/s High-Speed with 0.4/0.6mm Nozzle Bundle, CoreXY Structure & Silent Printing, Remote APP Control & Camera Surveillance

Excellent printer for a beginner. My husband has not stopped making items! It does make noise while printing but it’s not obnoxiously loud. Was easy to connect and pretty straightforward.

This product is PERFECT! EASY TO USE, WORKED PERFECTLY straight out of the boss. Only had to remove 4 packing screws. Not very loud while printing, works fast. Perfect!

This is my first 3D printer. Late to the game, I was printing a very complex Slappy Dummy head within 30 minutes of taking it out of the box. Orca Slicer is apparently a clone of bambu slicer, and it seems most of them are the same, but it has TONS of options that allow for custom scaling, support styles/placement, and any filament on the market in 2024. I've been printing almost non-stop for three + weeks now with some failures that were easy to diagnose and correct. The hot plate has excellent adhesion with PLA as long as it is kept free of hand oils. I have only needed the glue on a full size Jason V. hockey mask I printed for Halloween. I found that PETG sticks very hard to the build plate if the temp is above 65d and is very hard to get off. High speed PLA, PLA-Silk, and PLA Pro all print and come off the plate perfectly. The enclosed design keeps noise down and dust out very well. I have not smelled any fumes whatsoever so far thanks to the dual internal and external air filters. I found that trying to print directly from a USB stick can cause move queue errors due to read/write speed so copying all files directly to the printer's memory avoids this. It has a filament senor that stops the print if it runs out without letting the nozzle get empty so you can easily put in a new roll and it continues without issue. Also, it recovers from a power outage or accidental disconnect without missing a beat. For the price I would buy this again in a heartbeat.

Wow this printer is fast and make beautiful print if it holds up will be worth every penny. Update: well started having issues it would start a print then the head will just stop and sit in one spot but keep extruding I sent the printer back for a refund been 7 days and still have not received my money back. Good luck if you have to return it.

It is very simple to use, low manteinance and high reliability printer. Our team loves to work with it for its velocity and quality. Although it does not have a very good integration with Orca or the mobile app, it is very simple to handle and monitor. Hope Flashforge improves the integration. We got some issues dealing with PLA-CF and TPU, the humidity tends to make these materials a nightmare, and some of the nozzles failed for some time after using the materiales. They are now working again. I recommend it for fast ABS prints with and high quality. Use little glue in the bed.

To put things in perspective. I own an adventurer 4, and now two adventurer 5 pro. This is a great printer yet I believe that some of the gcode parameters at higher speed need to be optimized. I have printed in both PLA and PET. There are regions that delaminate and it totally depends on the orientation of the part. Around some corners the machine goes so fast that it pulls the plastic too much that there are regions that end up thinner. Hence constant wall thickness is not working. I have even reduced the speed to 1/2 max. And still get some of those print errors. All in all I have about a 20% of scrap parts because of the printer. One of the security screws on this unit came over tighten. The Allen key with the unit was stripped and I had to get my personal set to remove the screw to allow the axis to move for setting up the machine.

The printer prints great and is very fast. If al went as well as the printing I would give a 5 star rating. The problem is the connectivity of the printer to the slicer. I am using Flash Forge Orca and can only get to to "Lan Only" and then only some of the time. Very frustrating. on The devices tab of orca the printer will be present, but not connected. After much trying various things it suddenly wakes up. Good right? NOPE!! go back to the prepare tab and slice the project and try to send it to the printer. The Prepare tab says the is no printer attatched. Back to the devices tab it is there and active. When researching this issue, I don't find any, and I mean any useful help from flash forge. They have plenty of suggestions and either the setting is right, (and yes, I redo the already correct setting), of making the suggested changes has no effect. I keep messing around and it finally work. This should be seamless and tech support should be available!!

I have wanted a 3d printer for years, but never bought one until now. My 10 year old son asked for one for Christmas, so this is technically his printer. Thus far we are both loving it. This one was easy to set up. First test print was going in less than 30 minutes of unboxing and set up. Just printing models we find on the internet, but very happy with it thus far. No issues. My only minor gripe is that the written insructions are a bit lacking IMO. Unit comes with a flash drive which I didn't use until recently, and then found there is a bit of uaeful info and software on it.

Cette imprimante 3D est juste impressionnante tant en qualité qu'en vitesse d'impression, quel que soit le filament utilisé (de l'ABS au TPU).

Good purchase very little hastle to work with it, minus for me that spool holder dont have bearings its grinds alot

Ho atteso un po’ per scrivere la recensione ed essere il più onesto possibile, premetto che ho esperienza con le stampanti 3Ddi vario genere con cui stampo modelli che realizzo da me. Ho scelto questa stampante per la sua semplicità di utilizzo e devo confermare che al momento, per me, è la migliore e più facile stampante da utilizzare, fa tutto sola con pochi click. Ci vogliono molti di più dei 10 minuti per arrivare a stampare, ma una volta configurata è spettacolare, precisa, molto veloce. Ovviamente ogni stampante fa i suoi capricci, ad esempio a me, dopo la calibrazione del piatto alla prima stampa di default si è bloccata, l’ho spenta, riavviata, ho inviato un mio file in rete e ha stampato tutto e bene da quel momento in poi senza blocchi. Occasionalmente solo alcune prime volte rilevava errori di movimento piatto e testina prima di partire, basta fare stop e nel menu rifare l’homing e poi tutto ok. Cambiare filamento è diventato un gioco tanto è facile e finalmente sono riuscito a finire i fondi di filamento avanzati nel tempo. Sulla mia ho un problema con il sensore di fine filamento che non funziona, ma ci sono dei video molto ben fatti sul sito, probabilmente nel trasporto, con i colpi, si sarà staccato il contatto e appena ho un po’ di tempo lo sistemo. Non sono pagato per fare questa recensione, anzi, e vi confermo che è sicuramente la più facile, veloce e precisa stampante attualmente sul mercato. Ovviamente ci sono i contro, stampando alle velocità massime vibra molto, meglio posizionarla in un posto solido, poi le ventole che sulla mia sono rumorose solo in stampa. Un grande pro è che il piatto di stampa che mi è arrivato è in PEI oro, attacca tutto senza colla, mai un’imperfezione e zero manutenzione. Sono super soddisfatto la consiglio !!

Excellent

I have been using this printer for a while now and been liking a lot beacuse of its simplicity of switching hotends and now i've been using heavly for masks and it keeps delivering, i got it dialed in, and experience, just worried maybe about some parts if needed to switch because of use, printer worked for 4hs and another 5hs straight on the same day recommend for beginners, more printers should bring this features on the future 🙌🏻