ID-COOLING IS-55 Black CPU Cooler Low Profile 57mm Height CPU Air Cooler 5 Heatpipes 120x120x15mm Slim Fan, CPU Fan for Intel LGA1851/1700/115X/1200; AMD AM4/AM5

Used this in a stealth build and let me just say - it's been perfect. CPU temperatures stay cool - using a i7-13700KF and it's been smooth sailing. The stock fan is great but I ended up swapping it for a Noctua fan, not needed of course. Mounting this thing was not that difficult either, it took a few tries but once I got it we were good to go. It's super small and clears my ram perfectly well. Good on ID Cooling :)

This cooler is great, I never thermal throttle is any game since installing. Dropped temps 30°c 👍

Running my Ultra 7 265K at 85-90% load in a cheap case with only aux fan that came with the case, the temps got up to about 80 degrees C with hte fan not making too much noise. as soon as the job finish, the CPU went back down to normal in a minute or two. Excellent cooler, fantastic value. I'm not sure what it could do with an overclocked chip.

Purchased for a AMD Ryzen 5 5600G which is a 65w tdp processor, quieter than the stock cooler and does a better job handling temperature under high working loads, perfect for low profile cases and looks cool and sober on a bigger one

I have this cooler inside a Fractal Terra at setting 4, cooling a 7800x3D. Temps are great, and noise level is perfectly acceptable for me, even when using open-back headphones. I just let computer decide the fan speed, all I have set is a -20 PBO offset. Mounting and installation is super straightforward. Great price.

I had four CPU coolers for this build and went with this one because it is the most effective cooler in this size range, fits comfortably in my Mini-ITX sandwich case with a 3080, and keeps the [AMD Ryzen 5 7600] CPU running in the 40s-50s (C) on average, 60s occasionally, and 70s at load or while gaming. It can get loud if you don't use FanControl to keep it to a reasonable RPM, but fortunately it's so effective that with FanControl you can keep it running virtually silent. The only downsides are: the included thermal paste is the cheap stuff, so maybe use something better if you can. Also the fittings included for mounting are definitely on the cheaper side build-quality wise compared to Noctua hardware. But they work, so no qualms there, I suppose. They just aren't as sturdy as the Noctua equivalents. Still, I give it 5 stars because for the size and the price it's hard to beat this cooler.

Got this to cool my 7800x3d in my Fractal Terra case to pair it with my 4090fe. What a beast of a cpu for its size and you can’t beat it for $40. The fan does get pretty audible at max rpm’s (granted, the way my fractal Terra is configured, it has the is55 pushed up against the panel), but rarely does it hit those speeds. I wanted to try and swap out the fan for an arctic p12 slim and scythe kaze slim 120, but the former didn’t fit because the screws that came with the installation kit isn’t long enough and the latter gave out this unpleasant noise profile. Nevertheless, even at my 7800x3d stock settings, the is55 is able to cool it with my bios’ standard fan curve settings, without throttling, and WZ3 gaming at 4k/144hz, it never went above 75c. I adjusted my pbo to -20 for all cores and set it to 65w eco mode and it brought the temps down to 60c. So either way, is55 is able to hold its own. The is55 was super easy to install too! AM5 socket install was a breeze and I was even able to secure everything without having to unscrew the fan off.

Works great, much more quiet than OEM heatsink and fan. Plus looks way better!

Läuft seit Monaten einwandfrei und lautlos. Hab eine AMD 7800X3D welche hiermit wunderbar gekühlt wird

performs very well on R5 4500 am4 65w, even with back gpu so close as on riser so worst case and a smaller type itx case the cooler quite, keeps temps under control, normal use 35-41c and benchmarks 60-65c and even that in a hot room and full fan power i do not think i can hear it but i have other room fans. the build of it seems good, fairly easy to install, one a load reduces like end benchmark temps very fast return to norm, the only thing id say price, if the id 67 is around £40 i do feel this should be a little cheaper but im still very happy with it, think i paid £38, so impressed with it my old system getting new case and height limited ive gone and got the id 67mm not used it yet but one extra heat pipe i got it for £30 new but opened and that inc postage but normally they around £40 so in future i may review id 67, but id 55 used for 3 months now i think and so far very happy with it performance but id say 65w cpu is prob highest id go but i like my cpu at no more than mid 60's c so if you happy with higher temps go ahead, a great cooler for itx build

Switched to this in a Lian Li A4-H2O case after my AIO pump died. It's able to cool around 100 watts at 85 degrees Celsius (I do have 2 exhaust fans in the case though). Fan noise is not bad at all.

スリムケースでRyzen9 3900Xをきちんと冷やせる。 ファン自体が大きいので取り付けには時間が掛かるが 取り付けた分の冷却メリットは大きい。ミドルタワーだと サイドフローのほうが良いので用途としてはスリムタワー のほうが使い勝手は良い。

Sehr leise, kühlt einen Ryzen 9700X problemlos auch bei hoher Rechenleistung