BONTEC Dual Monitor Arm Desk Mount for 13–27 Inch Computer Screens, VESA 75x75/100x100, Full Motion Adjustable Monitor Arm with 360° Rotation, Height Adjustable up to 430mm, Max 10kg per Arm, Black

As someone who utilises several monitors for work, I wanted to reclaim desk space, without having to drill a load of holes in the wall for wall-mounting my screens. Enter this monitor stand. I had a couple of concerns. Firstly the top of my desk is a couple of inches thick and I didn't want to drill it, so would the clamping capacity of the mount be enough? Secondly, I was planning on mounting two 27" screens, which although not ridiculously heavy, aren't light either. I should not have worried. Firstly the hardware supplied with the mounting kit is ideal, including everything you need to get up and running and there is also a holder built into the cable management for the allen keys, so once assembled you can keep them handy for adjustments. The clamp fixes the mount to the desk very securely, holding the vertical post very nicely. The horizontal arms then attach very nicely, with plenty of adjustment vertically, so if you're mounting large monitors, you should have lots of space. You can then route the cables along the arms and down the vertical post. Overall, it is an excellent piece of kit. It only really does one thing, but it does it very well. If you have screens that are much larger than 27" you will end up using most of the horizontal travel in the arms, so you won't be able to pull the monitors very far forwards, but if you want to reclaim your desk space and mount your monitors without having to drill holes in anything, this is the way to go.

I bought the monitor arm to replace the single arm I had before, which was wobbly with any movement in the room and made me have to prop up my secondary monitor, risking it slipping. so this was to fix that and hold both together and off my desk. I am very impressed with the quality of the monitor arm as all the parts are metal and feel really sturdy, as well as being strong the paint finish is really clean. I had no defects or chips when mine arrived and I was really impressed that it had a really nice colour to it as I have seen some that look off-white. The set up was really easy as it's an easy fit to any desk and holds both monitors with the regular brackets that just can't be beaten. the size of it is really good as its no bigger than any other arm and it has a low profile adjustment system. The adjustment are really easy to make as each hinge has a screw that can be adjusted with the included allen keys. these hinges move very easy when loose and can then lock into position if you want to remove any allowence for change. the cable management that is included is the perfect size for the four cable that are coming from my monitors while also having enough room for the cable of my light bar and also an extra if needed. the fitting are placed in a big standard place which is very useful as it allows for movement to continue even with some shorter cables. overall very very happy with this arm as it has done everything that I wanted it to do while also eliminating having to much black and my setup dark, by having the clean white option. for the price isn't cheap its 100% worth it as other Dual arms on the market are asking for more and don't even have as good quality, backed up by the reviews on them... Definatly recommend, great for freeing up space and cleaning up the overall look of you set up.

Very sturdy and quite simple to assemble. The instructions are clear, and there aren't many places you can go wrong. The pivot points are very stiff out of the box, but can be adjusted with some effort using the Allen key (I put in a lot of effort, even thinking it would snap at one point). While listed as "height adjustable", this refers only to the vertical height of the dual arm. Your monitors will not be able to freely move upwards and downwards. I have two different brands of monitors, so when both are mounted, they do not line up at all. I'm a little disappointed by this, and it could have been clearer from the images. Rotation works smoothly however, and having one vertical monitor does eliminate the alignment issue a little. Very solid for the price, but do be careful if you have mismatched monitors (different resolutions etc.) as they will likely not line up.

Strong, stable and reliable. I love this monitor stand! It makes my desk look clean and organised. The quality of the product is sturdy and I like being able to adjust the height of my monitors with ease. The setup was straightforward and offered multiple different types of mounts depending on what setup you have.

I got recommended these monitor arms by a friend and he was not wrong. There's 2 ways you can build this but I went with the first method. Once it's all together, it clamps really well to my desk and feels very strong and sturdy. The quality of the whole set is great. Everything feels like its made out of a heavy metallic that is strong. It holds my 2 monitors very well too. It has room to move them around, rotate them side to side etc. Helping create different viewing angles and helps get them in thr right position that you want your monitors in. It holds both very well and dont look at all like its going to break or anything. You can have the monitors float high or low as they are connected to the tube that is clamped to the desk and it can be moved up and down when loosened. That is very helpful especially for my posture as I'm now looking straight ahead instead of down now, when on my computer. Absolutely recommend this dual monitor arm, its easily the best on the market at its price.

We needed two dual monitor arms in a hurry, to be installed on two separate desks. The only factors we were considering were; 1. same or next day prime delivery, 2. cheap as possible. The Bontec Dual Monitor Stand (BDMS hereafter) arrived on time, in a conveniently small box. No frills packaging, easy to open. In both cases all parts were well packaged and protected, no missing parts. Assembly instructions in english with diagrams were clear and laid out the distinct assembly steps for whether you were mounting the BDMS to a table with a hole, a grommet or no hole. The parts are well finished. We chose black but there's a white option available. There's no chipped paint anywhere. The parts feel weighty and durable, but the supplied allen keys are cheap and it would be possible to bend them if you put too much oomph into tightening some of the bolts. Frankly, as long as all the major parts are of good quality, which they seem to be, I'm not too concerned about the quality of supplied assembly tools - I have my own allen keys anyway, and now I know what size bolts are used, I'd just use my own for routine maintenance (this type of product will always need bolts tightened periodically as they loosen with use). In both cases, the BDMS was assembled onto an Ikea Linnmon / Adils desk. Technically, we probably shouldn't be assembling it onto this type of desk as they have a honeycomb and MDF core, but we accept responsibility for any issues that arise from this - it's an interim solution anyway - however, it appears to work fine. Assembly was straightforward, went as per instructions and was surprisingly quick. I am genuinely shocked by how good the finished product is, in relation to my expectations. I was initially going to refer to the BDMS as "cheap", but that would be doing it an injustice. Instead I'm going to use the word "inexpensive". This is a very good product for the money. It has great vertical adjustment. Horizontal adjustment is good but could be better. Pan, tilt and rotate are all great. In conclusion I wouldn't hesitate to award this product 5 stars - my couple of tiny quibbles are not enough to detract from the score.

So, there isn't an awful lot to say since its a very basic item however, I'll make sure to describe it to the best possible. Easy to Assemble? Quite, however, there was some points where the bolts were extremely tight and was a little worrying to adjust as I didn't want it to snap. Over all, the Assemble couldn't have been easier though, I had a 27" and a 24" monitor to strap onto the VESA mounts and it was extremely easy even for one person assembly. I would probably recommend to get another person to help if you can as it will make it must easier. I took maybe 20 minutes to set up? So it probably could have been a 10 - 15 minute job if someone was helping hold different parts and setting up the VESA mounts at the same time. Sturdiness, its been around 1 / 2 months since its been set up and its been great. The kit itself seems very well made considering the purchased price. I wasn't too sure if it was going to hold up since the 24" monitor is a little weighty but it is holding it quite well. Stability wise, the monitors are nice and firm with no rattling at all. Easy to adjust with the A Keys being attached to the Mount. For the price, I don't think I could have got anything better and it could honestly have been a £50 - £60 product if not more. Paying £28 was a steal and I would recommend this to anyone looking to mount their monitors.

Works pretty well and the price is good. The reasons its 3 stars instead of 5 are twofold; 1. You can't adjust the height of the two arms independently. If like me your monitors have the vesa mount at different heights, then your monitors are going to end up at different heights. Its quite annoying. 2. Its hard to tighten everything when the monitors are in place as they get in the way of the screws, but you cant see if its im the right place unless you do ot that way. Fine after initial setup but needlessly fiddly.