Cooler Master Vertical GPU Holder Kit V3, for E-ATX/ATX/mATX PC Case & PCI-E 4.0 Devices, Adjustable Modular Video Card Support, Thick SGCC Steel Bracket, 165 mm Riser Cable Included - Black

I was terrified to try this, but I made sure to get the V3 as it has no latency. This thing is a tank. It's more durable than the metal parts of my case. It takes all the weight off the motherboard slot and actually makes the form factor smaller. You can adjust the front/back and sideways position to allow better access to the mobo if needed. There isn't even a hole through the back if you fill it with the PCIe brackets you took out. No noticeable change in performance, allows MUCH better airflow, and shows off your GPU really nicely. This is the single best optional accessory I've ever bought for my PC and I take it for granted. You will not bend this metal. Follow the instructions and it's very easy to install, too.

I installed this in my gaming rig and it looks amazing. It holds the GPU securely and improves airflow. The build quality is solid, and installation was straightforward. Great upgrade for aesthetics and performance.

The Cooler Master Vertical GPU Holder Kit V3 does a great job of giving your build a premium look, especially if you're showcasing a beefy GPU with RGB. The vertical orientation really cleans up the case aesthetics and improves airflow around the graphics card. 💪 Pros: Build quality is top-tier — the bracket and riser feel sturdy and well-made. Compatibility is excellent, fitting perfectly in my mid-tower case (just make sure your case supports vertical mounting). PCIe 4.0 riser cable works flawlessly — no signal degradation or stability issues, even under gaming load. It definitely helps show off your GPU lighting if you’re into that sort of thing. ⚠️ Minor Issue: It does shift slightly when plugging/unplugging cables into the GPU, especially DisplayPort or HDMI. It’s not a dealbreaker, but definitely something to note. I’d highly recommend securing the bracket tightly—either by reinforcing it with extra support or ensuring all screws are torqued down properly. ✅ Final Verdict: Despite the slight wobble when connecting cables, the Cooler Master V3 bracket is a great solution for anyone wanting a clean, vertical GPU mount without sacrificing performance. Once secured properly, it looks amazing and performs without issues. Just be mindful during setup, and you’ll be glad you went vertical. Would buy again — just with a screwdriver in hand.

This is a great product makes vertically mounting gpu’s in cases that typically aren’t made for it a breeze. I got this in my antec c3 and works fine.

Honestly vertical GPU's are completely unnecessary, and I did expect thermal issues from installing this but I was honestly surprised by the quality. Got this with a great discount from amazon warehouse and it would be well worth full price. The ability to move the graphics card in two axes I looked at initially as a bit of a useless fad but actually comes in handy a lot when installing as the PCIE cable can be quite firm (though does not cause tension on the board) and ensures the card is not choked against the glass irrespective of case dimensions. It has a black metal structure with a black PCIE 4 riser cable that has 1 purple rung on it (which is totally invisible anyway once the card is installed) which looks clean in my H6 flow. My fans at the bottom of the case blow air directly onto my card's radiator fins now and I actually get improved cooling under load. This has not really affected performance and is really only there for aesthetics, but if you have the money I absolutely recommend it

The Cooler Master Vertical GPU Holder Kit V3 is a game-changer for my PC setup! It’s incredibly sturdy and holds my GPU securely in place without any wobbling. The installation was straightforward, and the build quality is top-notch. It also adds a sleek, modern look to my rig, showcasing my graphics card in style. Perfect for anyone wanting to enhance their PC’s aesthetics and stability. Highly recommend!

I'm glad I read the reviews first - I knew what to expect. Someone pointed out, that Cooler Master should really have made this item compatible with their own HUGE flagship cases (HAF700)- out of the box. It isn't due to the tool-less locking bars for PCI cards on the back. SO - I was expecting to have to cut a 1CM square off the new mount. The guy used a hacksaw but thats ok for the down cut, but not the across. I used a Dremel type tool to make it easy. Anyhow, installing the mount I had an upwards angle present - took me ages of faffing around until it was in properly. The instructions are ok I guess - but it never works out like that does it? Finally in place it looks belting. My case still makes the card look small mounted vertically - it's a 7900XTX - big card but looks small in there. No more sagging etc - this item can handle all cards I presume. I am very happy with the final result after finishing. Is the price fair? Not sure, it's certainly not cheap. It's very heavy quality metal with many ways to adjust for different cases/designs though. 4* for having to cut a piece off! Still a great item though when installed.

Update, don't bother with this product. A massive pain in the ass to get set up in most cases, and extremely poor quality. Both ends of the ribbon cable have broken within 5 months of use. As a product I get it, like and understand it. However the device is not made for all cases. I have an MSI Vampiric case, and had many, many issues with fitting this device. I had to bend and mangle. Parts of my case just to get the riser in, furthermore once I finally got the riser in place, plugging the cables into the device was near enough impossible, again without mangling my case, this wouldn't have fit. I would strongly advise trying to search videos of people fitting this riser to a case and motherboard you own, as it's very difficult for it to line up with every option out there. Hopefully I'm the anomaly and my case just isn't supposed to be supported, for the short term I had no option

Das Cooler Master Vertical GPU Holder Kit V3 ist die perfekte Lösung, um meine RTX 3090 eindrucksvoll zur Geltung zu bringen. Die Montage war überraschend einfach und dank der vielfältigen Anpassungsmöglichkeiten konnte ich die GPU genau so positionieren, dass sie optimal zur Schau gestellt wird. Die Halterung ist äußerst stabil und bietet eine zuverlässige Unterstützung für meine schwere Grafikkarte. Durch die vertikale Montage kommt das Design der RTX 3090 erst richtig zur Geltung und wird zum Highlight meines PC-Gehäuses. Die hochwertigen Materialien und die durchdachte Konstruktion des Kits sorgen dafür, dass die Grafikkarte sicher und fest an ihrem Platz bleibt. Insgesamt bin ich extrem zufrieden mit dem Cooler Master Vertical GPU Holder Kit V3. Es bietet eine einfache Installation, flexible Anpassungsmöglichkeiten und eine beeindruckende Präsentation meiner Grafikkarte. Für jeden, der seine GPU stilvoll und sicher präsentieren möchte, ist dieses Kit eine klare Empfehlung.

Bon produit, résistant, réglable pour avancer et déporter la carte, supporte bien, ne fléchit pas, tester sur deux cartes 3080 et 9070 xt. Attention à ce que le boitier soit bien ventilé pour éviter une chauffe de la carte, câble riser très rigide , produit de bonne qualité

Ekran kartınızı dikey olarak konumlandırmak istiyorsanız başka ürünlere bakmayın bile. V3 iki eksenli hareket yeteniği sayesinde GPU'yu anakarttan uzaklaştırma konusunda da çok işe yaradı. Böylece m2 için fanlı soğutucu kullanabildim. Kasam GamePower WarCry bu kasaya tam oturdu diyebilirim. V3'ün tek zayıf yanı ekran kablolarını takarken katın geriye doğru hareketine engel olamıyor, ileri geri hareketi kontrol eden papuçlar çok sıkı değil. Tutucu ile gelen PCIe uzatma kablosunun kalitesine ise diyecek söz yok, 4-5 FPS'lik bir kayıp ya var ya yok. Almayı düşünenler için yazıyorum, ekran kartınız kasanıza tam sığıyorsa uzak durun bu aparat ekran kartını 4-5 cm kadar kasanın içine alıyor, yani kasanızda ekran kartınız için olması gereken alan kartınızın toplam uzunlığuna + 5 cm aksi takdirde kasanıza kartınız sığmaz, uyarmadı demeyin.

Love the bracket but because the gpu has a 2nd bracket,(these 2 bracket do look impressive btw), BUT with my DeepCool CG530 4F which is a ATX middy tower the PCIe cable has to be twisted to connect to the motherboard which has dislodged and separated the cabling from the the gpu connecter.

ótimo produto.