Lamicall Tablet Stand, Tablet Holder for Desk - Multi-Angle Adjustable Tablet Desktop Dock Cradle, Compatible with iPad Pro 11, 12.9, Air, Mini, Fire HD, Galaxy Tab, and Other 4-13" Tablets, Gray

Apparently I've gone a bit mad for this stand. I counted back and, since early 2019, I have ordered a dozen of these great little tablet holders. Every time I see it come on sale I think of another person or another use for these. Quality control is impeccable, I inspect everything I receive from Amazon immediately when it arrives and every single one of these Lamicall Tablet Holders has been scratch-free and works perfectly (the hinge on the stand is neither too stiff nor too loose). My day job is working with mobile phones and tablets so I have 4 of these stands on my office desk alone. They fit Samsung Galaxy S and Note class phones, Pixels, iPhones, and iPads perfectly. It gets them up off the desk so they don't take up as much space (especially the tablets) and can be easily canted to whatever angle makes sense for the testing I'm doing. Sometimes I'll have an iPad in one of these holders and be demonstrating another device in a second holder using the back camera while on a teams meeting or a zoom or webex call. Around the house I have a couple on my kitchen island so my wife and I can keep our iPads out of any foodstuffs that may be on the counter. This keeps the screen visible to me whether I'm looking at a recipe or viewing a youtube video. I also have one I keep on a smallish end-table in my media room as there is just not enough room there to lay down a tablet (barely enough room for a phone) with the remotes, Kleenex box and dishes that are invariably already there. Most of my devices are wireless these days, but for those that aren't (I maintain legacy devices for backward compatibility purposes), you can feed the charge cable through the back and the gap in the actual device holder allows you to easily plug it in to your device. Also this is MUCH more attractive and less cluttered than having the cable snake its way around the phone to the bottom if you're laying it flat on your desk but want it oriented properly toward you. This is an inexpensive, simple and satisfying accessory that makes a great gift for people who already seem to have everything. You really don't know you need one of these until you've already got one. My mother has already commented on hers several times and uses it whenever she is Facetiming with either us or her grandkids. Oh, be sure to get the "Tablet" holder and not the smaller "Phone" version. I haven't tried the smaller one but this works just fine for phones and why limit yourself? So color me a bit obsessed, but I really can't say enough good things about this tablet holder.

I love this iPad holder. It’s sturdy, compact and well made

I recently purchased the Lamicall Tablet Stand Multi-Angle, and I must say, it has exceeded my expectations as a tablet holder. This versatile and adjustable stand is perfect for my tablet and provides an excellent viewing experience. One of the standout features of this tablet stand is its multi-angle capability. The adjustable design allows me to choose from various viewing angles, ensuring optimal comfort and minimizing neck strain. Whether I'm watching movies, browsing the internet, or video chatting, I can easily find the perfect angle for my needs. The sturdy metal base of the Lamicall Tablet Stand provides exceptional stability and support for my tablet. It raises my tablet a few inches off the desk, creating a comfortable viewing height and preventing unnecessary strain on my neck and wrists. The metal plate with rubber pads securely holds the tablet in place while also protecting it from scratches. I appreciate the thoughtful design of this tablet stand, which includes cutouts to accommodate charging cables. This allows me to charge my tablet while it's on the stand, ensuring uninterrupted use. The stand is compatible with various tablets, including iPads, and can hold devices ranging from 4 to 13 inches. In terms of value for money, the Lamicall Tablet Stand delivers excellent quality at an affordable price. It is built to last and provides a reliable and secure hold for my tablet. The positive customer reviews I read before purchasing this stand were accurate, and I am now happy to add my own positive feedback to the mix. Overall, I highly recommend the Lamicall Tablet Stand Multi-Angle to anyone in need of a reliable and adjustable tablet holder. Its sturdy construction, multi-angle capability, and compatibility with various tablet sizes make it a fantastic accessory for both work and leisure. Say goodbye to uncomfortable viewing angles and enjoy a hands-free tablet experience with this excellent tablet stand!

Nice . Works great

Important tips for the first time using the stand: a larger tablet might tip out of the "cradle" of hte backrest easily unless it's tilted back far enough. I suggest tilting it back "too far" at first and gradually bring it to the desired viewing angle. Those who want to use this stand with a stand-alone tablet (e.g., without a clip-on reversible keyboard), be careful of adjusting the tilting backrest too upright, especially when using the stand for a larger tablet set upright in "portrait" mode unless the cradle is tilted back far enough for the tablet not to just tumble out. but for smaller tablets, smart phones (or even a larger tablet set horizontally in "landscape mode"), it is good. I wouldn't use it with a full-sized laptop though the "bite" of the cradle isn't wide or deep enough for those. The tilt is nice and "stiff" so it stays at whatever the angle you set to it (just make sure it's tilted enough so that the tablet doesn't fall out, the cradle "bite" isn't very wide, so a larger tablet set upright might be unstable). To the good points, the stand keeps the tablet up off the table surface and safer from spills. It's solid metal, so it can handle anything from a large tablet to a smartphone. I like how the stand has an opening on the base to feed a charger cord through, just remember to detach the cord when you take your tablet with you, or you may take the stand dangling along with you--whoops! I use it with an RCA tablet that has a clip-on reversible keyboard. Before, I'd set the tablet on a table "easel style" with the keyboard reversed and the screen facing out. That led to problems when moving the tablet around and adjusting the angle of the screen (the keyboard would come off). I got the Tablet Stand Multi-Angle, Lamicall Tablet Holder so I wouldn't need to keep the keyboard attached. However, first few times I adjusted the tilt to my eye-level, the tablet would just fall out of the cradle too easily. I solved this by re-attaching the keyboard like before over and hung the tablet right over the backrest easel-style like I did before, the keyboard as a counterweight. Now I can move it around and it it works just fine that way for me.

Working from home, I needed a more ergonomic set up for my laptop - MS Surface Book 13". I was using it with a standard laptop stand, which elevated the screen okay. But, with the desktop keyboard/mouse, it took up too much space on my desk. I tried using the Surface Book in presentation mode, but that was too low for comfort. I crossed my finger and bought the Lamicall iPad Stand hoping I would be able to fit the Surface Book on it with the screen reversed and folded in "table mode," but I wasn't certain it would fit and be stable. It worked perfectly. The Surface Book fits with the keyboard attached but folded fully and the screen facing outward. The stand elevates the screen as much as a normal laptop stand, but keeps the keyboard folded out of sight and not taking up the extra desk space. The Surface Dock fits perfectly on the base of the stand, underneath the computer. Once I added my Bluetooth keyboard and mouse, I had an ergonomic mini-workstation with enough room on my desktop for any papers I am working with. The stand is very well designed and manufactured. It looks cool, and functions well. A hole in the back helps manage wires, although I may add some Command Strip wire clips to wrangle the wires a little more (depends on how many peripherals I end up attaching). The hinge is easily adjustable, but it is tight enough to hold the laptop where I need it to. It really is a beautiful accessory. It has a very Apple aesthetic (which also pairs well with the MS Surface line). Minimal, but functional. It works great with my iPad Pro, as well. If you have a 2-in-1 laptop that is thin enough, though, this is a great desktop stand -- if you plan on using a full-size keyboard and mouse. It lets you move the laptop's keyboard out of the way, but still raise the laptop to a more comfortable viewing angle. The construction quality is top-notch. Honestly, I was expecting a LOT less given the price point. I could easily see this selling for $60 or more. Under $20, it is a steal. I could also easily see this selling in the Apple Store for over $100. Overall, I could not be happier with this stand. It is a great product well worth many times the price. Highly recommended.

This tablet stand is exactly what I needed! It’s sturdy, well-built, and holds my iPad securely. The adjustable angles make it perfect for watching videos, Zoom calls, or reading. It doesn’t tip over and looks sleek on my desk. Great quality for the price.

Nice item, nice quality