EZDIY-FAB GPU VGA PCIe 8 Pin U Turn 180 Degree Angle Connector Power Adapter Board for Desktop Graphics Card-Reverse Type 3-Pack

worked fantastic, worked on my rtx 3080 for about 2 years now working on my rx9070xt, don't get hot, good quality, look good for my case to make it better on the angles, very good value, and brilliant durability

If you were sceptical of the quality or capacity of these adapters then don't be. They plugged into my RTX 3080 easily and have handled the full power flow with zero issues for months now. They look sleek and discreet and have really helped with cable management in my case. If you need them, get them.

At last - begone dangly wires! These suit the 7900 Nitro really well and also the 'mini' Wraith Ripper, but my sense of aesthetic may differ to yours. I think they finish off my pooter great, no problems installing and work fine. After someone else's review it is a good idea to check each one singly just in case but I've had no trouble with mine. 10/10 nice one! Edit. Having seen the one star reviews whinging about can't run a "powerful" card I can attest that the card I have pulls over 430w when under load and not even a blip. No smoke, spontaneous combustion, death from electrocution. One of them even chopped up the adaptor to make it fit. I would suggest their problems are ID ten T issues rather than with the products- they`re perfectly good.

Easy to install. Worked straight away.. just make sure you get the correct adaptors.. i just bought both types to be sure.. theres ones that face up and others that face down..

Usually splicing a wire (adding an additional connections) introduces an inherent risk of sparking and arcing, not the case here; connections are secure, looks great, and most importantly, works as intended. Comes with 3 instead of 2, it's great to have 1 spare incase you accidentally scratch the matte surface of one, like I did.

For the price these are great, really make the build look tidy.

Fit was good but could have have been a little more secure on the GPU end, otherwise they blend in nicely with my black build. Easy to install, decent value and quality is fine for what you pay. Quite pleased!

These are okay but fit a little loose in my 3070ti

Don't let some other reviews fool you about these being unsafe. It seems that there are some people reviewing these that understand how to use a multi-meter, but don't really understand how GPU's are powered. Yes, all of the ground pins are common as are the three 12v pins. This is NOT dangerous, and it is NOT a short as these people are implying. It seems they decided to use a single ground plane and a single 12v plane on the circuit board. The GPU only uses 12v and ground. As long as you're getting the proper signal on the proper pins, which all five that I've bought do, you're perfectly fine. If you were finding the ground and 12v bridged... that would be a short, and would be absolutely dangerous. Not a single one of these that I've bought have had a short. You can ignore the reviews saying these are unsafe because the grounds are all common as well as the 12v, and that's perfectly safe for this applications. These people simply do not understand what they're talking about. As to the rest of the product. They do what they do well, they're constructed about as well as you can expect them to be and they look quite good... much better than the majority that just put some foam on the back to protect the exposed circuit board. Above all else, they're safe to use. My one complaint is that there is no latch, which makes sense if the latch is on the inside of the connector as it would be very hard to reach. However, once connected, the connection is pretty snug and they don't back out easily. I'm using a different set on a 3070 Ti and they've been working great. I was using this set on a 3080 Ti, but opted to go with the Thermal Grizzly WireView. Not for any shortcomings of this product, but the way I have the GPU setup and my custom cables, it was pulling on these in a way I didn't like and the WireView is a single block making it more ridged for this application. It's also nice that it can display how much wattage and current the GPU is currently consuming in real time. However, it is quite a bit more expensive. If you need a 180° adapter and you don't want to spend a lot, but you want it to look nice, these are a must. Just be sure that the orientation is correct for your GPU. A lot of people are giving these bad reviews because they didn't read and bought the wrong kit. If you're willing to spend more and you'd like to be able to see the current power consumption, I highly recommend the Thermal Grizzly WireView.

Con este producto los cables van directamente a la tarjeta gráfica y no se notan, parecen se buene calidad y no he tenido problemas para ahora

Bought these on a whim and had them kicking around in my small parts box. Ended up using them on a I 7 14700k/9070XT build my company Deadseacustompcwurx.ca was commisioned to build. They helped bring the look of the build up a notch!! Wouldnt hesitate to use them again!!

Use estos adaptadores en dos maquinas diferentes, en una máquina (la principal) mejore la estética moviendo el cable hacia atrás del Gpu, en la otra maquina (pc de recamara) el panel de mi nuevo gabinete Home theater Pc horizontal no cerraba por los cables de alimentación (muy arqueado y tiesos, ahora con el adaptador el panel del gabinete cerro sin problema. Justo lo que necesitaba.

A marché, pas trop dur à installer