JETech Screen Protector for Samsung Galaxy S20 5G 6.2-Inch, HD Clarity, Flexible TPU Film, 2-Pack

I was a little skeptical after reading some of the other reviews but I am very glad I did not let someone else's not so good experience sway my decision to buy these. Pros: First of all, I LOVE the aligning tool! ALL screen protectors should come with one! I didn't use the sticky part to hold the phone down because I wanted to be able to use it again in the future if I ever need to apply the second protector in case I damage this one so I just used it to hold onto while I cleaned the screen so I didn't leave any residue or fingerprints. The aligning tool, if used properly, makes the installation SO EASY! I have been using "peel and stick" films for about 8 years (because I HATE, with a passion, the wet application ones) and this one was by far the easiest to put on. I can't tell you how many peel and stick films I have applied to our household of phones. I reapply a new one to each of our phones about once a year and I have basically mastered the skill of getting them on with zero bubbles and dust and being nearly perfectly aligned without any aligning stickers, etc. This tool was SO NICE to have so I didn't have to spend much time worrying about alignment. The directions are SUPER clear and I kind of laughed about those who were complaining about them. It doesn't get much clearer than this! If you can't understand them, you might need to go have a "professional" install your screen protectors. Which, I had done ONCE 8 years ago with my very first smartphone and well, they didn't give a flip about getting it on without dust or bubbles or even aligned right and that was the last time I ever had anyone do it for me. If you're like me and very picky about no bubbles and no dust, to have it done right......just do it yourself. I had zero issues with the application and I did it exactly the way they instructional video said to. I did have a tiny bit of bubbles at the very bottom when I pulled the top layer of film off, but I just took a piece of tape and re-lifted the bottom of the protector and used the scraping tool to reapply and pushed 2 tiny little bubbles out with my nail until they were gone. Pro tip: I have used my fingernails to gently push along the protector to remove bubbles in almost every screen protector I have put on and that worked way better than any tool. If you don't have fingernails, you might never get all the tiny bubbles out. The sides of the protector have NO issues laying down on the curved screen of my S9. They barely needed any help. I like the feel of this protector. My phones glass is very smooth and my finger would glide effortlessly across it to swipe. This protector is not as smooth as the glass under it, but it is smooth enough that I am happy with it and I actually like that it isn't as smooth as the glass. The original glass was just a bit too slippery for my liking so this protector has just enough "grip" if you want to even call it that. I tried a wet application protector prior to this and it was awful! Made my screen feel sticky and the visibility was terrible. All the peel and stick films that I have ever used have always been nice and smooth and clear. Truly is "edge to edge" coverage! I mean, there is absolutely no screen left uncovered on the left and right sides! Didn't even lift away when I put my case back on. However, bottom and corners are somewhat exposed. My case takes care of the bottom exposure but I do see space between the corners of my case and the protector. Not a deal breaker but I do wish the corners had 100% coverage like the left and right edges. Cons: I was a bit disappointed that the kit didn't come with the "wet and dry" packets of wipes that I have received in every kit I've ever bought, up until now. Luckily, I had a couple from another kit that I could use but just having a microfiber cloth and a dust sticker doesn't cut it for me. Only 1 dust sticker? Kind of disappointing when you have 2 screen protectors. I buy kits of multiple protectors so that I can have extra protectors for later. Some buy them to apply to multiple phones at once so it may not be as big of a deal if you are doing that. For me, I like to have more than 1 so that I can apply a new protector later when this one gets scratched, worn, etc. Again, luckily I have a couple of extra dust absorber sticker sheets from previous kits. Not everyone does though. Overall, I'm pretty happy with this purchase and would definitely consider buying these again in the future as long as they hold up nicely. For the price, I am quite impressed. I've only had the protector on for 24 hours so I will update the review for quality at a later time. UPDATE: 6/19/2020 Over 1 year later and this protector is STILL holding strong! It hasn't lifted, torn, or been harmed in anyway that would cause me to want to replace it yet. Yes, there are tiny little micro-scratches on it from it doing it's job and protecting my screen, but it is not in any way hurting my visibility at all. Also, just so it's known......I have used 70% alcohol sanitizer on my phone and this screen protector almost daily since the C-19 flare up and it hasn't phased the protector one bit! Taking this protector up from 4 stars to 5!

They are very, very good, I highly recommend them.

The install kit makes it very simple to line up the screen protector to the screen. Install was quick and with a few passes to smooth out the bubbles, it looks great!

I thought this product was idiot-proof, but somehow my phone carrier company managed to screw up the installation and use up all the handy dandy cleaning accessories it came with. I'm glad that it came with multiple so that I could use a spare. Since I thoroughly watched the installation video, I was able to do it first try without much stress. Pros: -Easy to align and install if you watch their video -Fingerprint touch works -Self-cured the remaining bubbles within 24 hours -Fits with room for error if you misalign it (my OtterBox case still doesn't interfere with the edge) -Comes with three so you can try again *It is very sticky, so do not try to lift up and attempt to readjust mid-installation I haven't dropped my phone yet, but I still believe the quality will protect my screen well

I have used LK Screen Protectors in the past for my Samsung S10 and thought I would try a different brand. I ordered the JETech Screen Proectors for my S10 based on the positive reviews. That was a mistake, installation was not easy and I could not remove the bubbles under the screen protector plus they did not align with the front camera and the curved screen of the S10. Tried both in the package with the same result. I reordered the LK Screen Protectors, I used in the past for the S10 and they installed very easy and there were no bubbles plus they worked with the curved edges of the S10.

I recently had to replace my screen protector because my infant decided to use my phone as a chew toy. After spending 20ish minutes with cleaning my phone, reading directions, setting everything up, and applying the protector, it looks and feels like it's not even there. I'm very happy with the results. This kit comes with a card w two sides (a hard edge, and a soft firm edge), a microfiber cloth, a stabilizing adhesive tool, and two screen protectors. The written directions were simple, had pictures and made sense. There was also a video which I didn't watch, so idk how helpful it would be. The screen protector was really easy to apply. I had to redo sections of it bc of some bubbles, but that's my fault honestly. The adhesive stabilizing tool was my favorite part. It went into the charging port and prevented most movements of the phone by keeping it stuck to the desk. I can imagine if you have paint or a paper covering on your desk, this could potentially damage it, because the adhesiveness is strong. It did not damage my desk though when I removed it. When using my phone, the responsiveness is perfect, the picture is clear, and the feel of the screen protector on my fingers felt a little different than my stock protector, but I'm already getting used to it. It could be because my stock protector was a few years old. As for durability, time will tell. I've encased my phone in an otterbox, so the protector edges are already covered by the case. I could foresee the screen protector coming loose on the edges, but I only recently installed it. EDIT: About a month after installing it, the edge peeled off and the whole thing began to fail. I expected it to work longer, but oh well.

Perfette e facili da applicare

I was pleasantly surprised by the installation tools provided. The package came with a plastic attachment you plug into your phone's charging port to line up the screen protector. I forgave the lack of wet wipes as I had my own Isopropyl alcohol. All was good until I peeled off the plastic off the screen protector and I have to say. I've never had so many bubbles on a screen protector and I've never had a plastic screen protector be this soft. I tried using the provided squeegee to flatten out the bubbles but they just wouldn't go away. And when I used my finger I somehow managed to stretch the screen protector out of the phone? Don't think I'll be buying anything from this brand anytime soon.

Prima protector, waarmee ook de vingerafdruk-sensor uitstekend blijft functioneren op mijn Samsung S21 5G. Ook het aanbrengen van de dikke folie was probleemloos.

سهل التركيب وحتى لو طلع ببلز يوم بالكثير وتختفي.

Good product and fits well.