AQUA CREST 5KDC Under Sink Water Filter System, Direct Connect Under Sink Water Filter, Reduces PFAS, PFOA/PFOS, Chlorine, NSF/ANSI Tested 5K Gallons Ultra High Capacity

Easy to install if you're a maintenance man or a plumber. It's just nice to have filtered water without having a pitcher sitting on your counter all the time.

Been using these for about 9 months now. Had slight sulfer and iron taste in my well water. It took out the taste and is working still. Not sure how it would work for heavy amounts of iron in the water. Flow rate is about the same as I had not really i any noticeable restriction.

Easy to install, the hoses are a bit flimsy, and would rather have threaded input and output on filter itself instead of the push fitting, time will tell when I change it. Does filter water for ice maker in fridge

I installed this on a bathroom sink. All the needed fittings were there and were of good quality! No more chlorine taste out of that faucet!

what sold me on this filter is the math. 5000 gallons and 25$. i use the hot water mostly in the kitchen sink which is a separate source, so i knew that wouldn’t be using the filter. i calculated max a few gallons a day for drinking and washing fruit/veg, that’s all i use the cold water for on that tap, but it would take 13gallons a day to hit 5000 in a year, so even if my math is way off that’s plenty of room for error, and this 25$ for a year (or many years bc i won’t use it much) is WAY more cheap than anything out there. and you know the filter is done when the flow goes bad (finally dug up that answer). i saw another under sink for 50$ & 8000gal and the ones in the pitchers barely last long and we more expensive and take up excess space. this one hides away under the sink. another win. and look, even if you don’t care about tap water quality it’s better to be safe than sorry for just 25$ every few years, dead cheap. now install. well hindsight it is an easy install, just twisting some valves on/off/into existing piping to accommodate the filter. actually i was missing a tube that was later found, wow that makes a huge difference, obviously. it does come with two tubes and the needle quick connect male is inserted into the filter via a push compression valve, which is quite difficult to undo unless you know to hold the sleeve (the female white plastic hole on both ends of the filter that the silver male connector tube/needle goes into) down (towards the filter, don’t let white sleeve rise) then the male needle slides out of the filter. this is what you’ll need to do when you replace the filter. it says in directions to press ‘together’ the sleeve with thumb and index finger, but it should say hold it down, since that’s what keeps it lose enough to expel the male needle. once i found my missing tube i haphazardly inserted the needles into the filter only to realize i put them in the wrong ends. One needle was easy to pull out but the other one wasn’t, so i ended up using pliers to hold the sleeve down and it still took lots of force but finally got the needle back out. i feared i damaged the sleeve but luckily once i turned on the water no issues. i let it run a while to clear the initial sediment (looks cloudy for a while) then after 5 or so minutes the water was clear and for sure tastier and more odorless than unfiltered tap. extremely satisfied and disappointed i didn’t do this forever ago, who knows what i’ve been drinking. although i was using a fridge filter but the water function just broke so once i went back to unfiltered tap i realized how nasty it was and knew i had to find the best solution for taste and health sake. cheers guys!

We get our water out of a creek. No matter how many filters, settling tanks, etc., etc. we have set up. Water was still brown and tasted nasty. I know this says it’s for municipal water sources only. But it works great on our creek water. I can actually drink the water out of my tap now.

Easy to install, good flow

Filter is easy to install. I got it to reduce chlorine taste. It adds a straw or plastic taste to the water unless I let water run for 20 seconds.

Easy install. Good quality.

Works great and simple clean installation kit and fittings. Good water quality.

Easy to install and eliminates chlorine!!! Water taste better

Installed in less than 10 minutes. All fittings and connections are water tight. Works well. Quality product.

I bought this thinking it may at least help a little with the horrible taste of my water . To my surprise my tap water now taste better than bottled water completely eliminating the need to buy bottled water !! Easy to install and takes up almost no space . I'm loving it . Highly recommend .