Descargar la aplicación
Servicios al cliente
Sobre nosotros
Copyright © 2025 Desertcart Holdings Limited
Descargar la aplicación
BCM 57810 2S based on Broadcom BCM57810S, is the solution of choice for workload intensive computing environments, providing a reliable, high performance 10GbE connectivity solution. Features: Dual port 10GbE connectivity for rack and tower servers x8 PCI Express reg; (PCIe 8482;) V2.0 (5 GT/s) support Full line rate performance across all ports Broad OS and hypervisor support Full iSCSI and FCoE hardware offload Full TCP/IP hardware offload –Microsoft reg; Chimney compliant Network boot support: –iSCSI remote boot –FCoE boot from SAN –Preboot eXecution Environment (PXE) 2.0 Specifications: Form factor: PCI Express short, low profile card 167.64 mm x 68.91 mm (6.60 quot; x 2.71 quot;) Data rate:10 Gbps per port, per direction Bus type:x8 PCI Express 2.0 (5.0GT/s) MAC controller: Broadcom BCM57810S of Ports: Dual Connector: SFP+ Review: Great Value - I must say, that thise netcard are pretty good and are just working right out of the box. CachyOS (Arch Linux) found the card right away, no driver install needed. I got two of them, and have bought a pair of DAC Cables and have made direct connection between my PC. All I needed was to setup local ip adresse and up and running in no time. I used 10.0.0.1 for port 1, 10.0.0.2 for port 2, Gateway 10.0.0.10 and DNS 10.0.0.10, on the other card, I used 10.0.0.3 and 10.0.0.4 and again 10.0.0.10 for DNS and Gateway. If you want, you can either use bridge or bond to combine both ports on one of the netcard, so you instead of 10GbE get 20GbE out of the cards! Use arch wiki for how to or even just ask ChatGPT. Just remember, if you want to bind two ports to become 1, that this shall ONLY be done for 1 of the cards. I really recommend this under rated cards. Buy them and enjoy the fun with either 10GbE or 20GbE networking the EASY WAY. Review: Not able to get over 3gbps - Regardless of which combination of PCI-e slots and settings I used, I wasn't able to get this above 3gbps even using fibre cables and transceivers. Returned it and gave up.
| ASIN | B06X9T683K |
| Brand | H!Fiber.com |
| Brand Name | H!Fiber.com |
| Color | Red |
| Colour | Red |
| Compatible Devices | Desktop, Laptop |
| Customer Reviews | 4.5 out of 5 stars 210 Reviews |
| Data Link Protocol | Ethernet |
| Data Transfer Rate | 10000 Megabits Per Second |
| Hardware Interface | Ethernet, PCI Express x8, PCIE x 8 |
| Item Weight Unit of Measure | 0.21 Kilograms |
| UPC | 602693070041 |
P**E
Great Value
I must say, that thise netcard are pretty good and are just working right out of the box. CachyOS (Arch Linux) found the card right away, no driver install needed. I got two of them, and have bought a pair of DAC Cables and have made direct connection between my PC. All I needed was to setup local ip adresse and up and running in no time. I used 10.0.0.1 for port 1, 10.0.0.2 for port 2, Gateway 10.0.0.10 and DNS 10.0.0.10, on the other card, I used 10.0.0.3 and 10.0.0.4 and again 10.0.0.10 for DNS and Gateway. If you want, you can either use bridge or bond to combine both ports on one of the netcard, so you instead of 10GbE get 20GbE out of the cards! Use arch wiki for how to or even just ask ChatGPT. Just remember, if you want to bind two ports to become 1, that this shall ONLY be done for 1 of the cards. I really recommend this under rated cards. Buy them and enjoy the fun with either 10GbE or 20GbE networking the EASY WAY.
M**G
Not able to get over 3gbps
Regardless of which combination of PCI-e slots and settings I used, I wasn't able to get this above 3gbps even using fibre cables and transceivers. Returned it and gave up.
M**A
Produit acheté et installé dans un Synology DS1821+
La carte est de bonne qualité, aucun driver à installer, elle est reconnue immédiatement par le système. Performances au rendez-vous, je constate une nette amélioration des transferts en 10GbE, sans surchauffe ni instabilité. C'est une excellente alternative, bien moins onéreuse que la carte officielle Synology, tout en offrant des fonctionnalités identiques. Je recommande vivement pour ceux qui cherchent à upgrader leur NAS sans se ruiner. Livraison rapide et bien emballée. Très satisfait de mon achat.
I**N
Perfect Solution for 10G on Ubuntu Linux 22.04.2 Highly Recommended
My use case is a personal development network with two high end desktop workstations, one with AMD Ryzen 9 and the other with Intel i7. Both are running Ubuntu Linux 22.04.2 PRO and I am using a Mikrotik CRS306-4S-1N switch. Both Desktop systems have this board and cable into the switch with 6COM 6C-SFP-10G-T SFP+ 10G RJ45 Adapters and CAT8 cabling. As soon as everything was plugged in the systems came right up and everything was fast and sweet. Don't forget to plug in the backhaul cable from the switch to your in-house network feed otherwise no DHCP and the 10G connections don't com up. Highly recommended. This is plug and play and the most practical sense. Installation time was about an hour and that include putting boards in two machines, running cables, attaching adapters and installing switch. "Settings/Network/Ethernet/Wired/enp11s0f0 showed connected at 10000 Mb/s immediately.
A**H
Works as expected and Very happy
Works as expected and Very happy
Trustpilot
Hace 3 semanas
Hace 5 días