J-B Weld PlasticWeld Epoxy Stick

Fantastic product if you know how to use it properly. Cures extremely hard and bonds to plastic well. Its a little messy to use, but it is manageable when using gloves. I used it to fix my car's wind deflector which shattered into several pieces, some of which were missing. After sanding and painting, I tlreally cant tell the difference between the putty and the original parts. Its a bit overpriced for such a small amount, but it did what I needed it to do.

I needed to repair a plastic tool box that had a piece broken out of the bottom and having used J-B products before with success...I decided to give this one a try... I have to say it was a good choice. Easy to follow the instructions, I did this repair indoors and no odor. Worked perfectly.

It works well, used it to repair a crack in a plastic bathtub. So far it is holding up well and there is no leaks for the repaired are. Make sure you sand and clean the area to be repaired well, this is to ensure proper adhesion. The only bad thing was the smell, it was so strong, even with the exhaust fan running, I had to leave the area a few times to catch my breath. Good product and works like it says.

This is amazing! The handle on my microwave came off and appears to have been previously re-attached. I scraped off the old adhesive and used PlasticWeld and its never coming off again. This worked like cement! I couldn't be happier with this product.

I have to admit, I was pretty wary about trying this, which I used to patch a hole in the wall of a Litter Robot globe. I was first introduced to "JB Weld" in the 90s, and back in those days what you ended up with was a bond that looked like metal, but would easily crumble just by applying pressure with your fingers. THIS STUFF, surprisingly, dried much harder and created a very tight, high quality bond with the plastic globe of the Litter Robot. I experienced none of the difficulties with this that I experienced back with JB Weld in the 90s. It was not runny until dry, it stayed in place, dried and bonded like a boss, and it looks pretty good, considering I haven't yet sanded it. All in all, this product delivered on its promise, my LR3 globe is once again fully functional, and makes me completely satisfied. There is a bit of a smell when the product is fresh from the packaging, but nothing that I could sense once dried. As for the people who have posted saying it doesn't dry, it doesn't work, etc... I have to wonder if they followed the instructions and actually worked the product to mix it as the instructions indicate, because for me, drying was NOT an issue. In fact, I would almost have to argue that it dried a little too quickly. Also, wear gloves when using this product. If it gets on your fingers and dries, it's difficult to clean off. The instructions say to wear gloves, but I'm impatient.

Sort of worked

Had a very large, multi-day 3d print fail on me. I was able to print the missing portion but needed to bond the two areas together. because of the large area I needed something with decent working time that would hold over a surprisingly small actual contact area. This was exactly what I needed. so pros: 1) allowed me to fill in the infill at the contact area to create more surface area for the bond. 2) easy to work with after i got a method down (I recommend a test round on something if it's your first time using it before moving onto your project so you get a feel for it) 3) shapeable both during application and after to help smooth out the shame of your failures 4) surprisingly strong. I needed the bond to hold about a kilo of weight, and after some testing that appears to be more than easy for this. 5) probably the longest working time out of the alternatives for what I was trying to do. (i.e. CA glue, plastic cement... etc) Cons: 1) just a touch less working time then I would have hoped for. it said 25 minutes, but started to get hard to work with around 15 minutes. Again, WAY more than my other options, but it did lead to extra post processing work I would have liked to avoid. 2) it's a touch harder once cured than the plastic around it, so when sanding it I was tending to take away more of the base material than than the epoxy, but i sort of expected this going into it. Until I find a better option for this specific use case, this will remain my top choice.

My daughters car had a lower door trim piece coming off. I used a rag and cleaned what I could prior to mixing up the putty. After mixing it up for a few minutes, using gloves, I pushed the putty in between the panel and the bottom of the door. I pushed the door panel tight with the door and used the spare tire to hold it in place. After letting it sit all night, I moved it away in the morning and went to work. When I got home, my daughter had been all over town running errands. The door trim piece was still sitting exactly as I had set it. It has now been several weeks and the door trim piece has not moved. I will use this J-B Weld on a lot of other projects as it is probably the best product I have found at this type of repair. Highly recommend.

Great stuff worked so well on my wing mirror

I wanted to thank you for resending the above order. I received the package in good order. Thank you very much for the excellent service. Goede aftersales contact met verkoper, eerste pakketje was zoek geraakt waarna verkoper me een direct een nieuwe heeft toegestuurd. Prima service van die bedrijf.

It hardened and becomes part of the broken material. Used on my cracked luggage. Works perfectly.

Expired and not working

It did all the things it had to repair