ECOTRIC Stubby Front Bumper Compatible With 2007-2024 Jeep Wrangler JK JL Gladiator JT W/Fog Light Housing & D-rings Steel Powder Coated Black

ECOTRIC Front Bumper is indeed an invaluable asset, in fact, it can easily fit a custom setup like mine which is a C-10 wheeler! First it was made for Wranglers and Gladiators but after some minor modifications, it goes on my truck really well. The front bumper is very robust and stiff and can take a lot of abuse on rough terrain and most importantly, very good for the front end protection. The off-road bumper offers a rugged and aggressive look, which perfectly matches my off road setup. Moreover, the built-in winch plate and D-ring mounts are fantastic features that allow for easy recovery scenarios. In addition, it adds beauty but is also very practical as it’s highly resistant to rust and scratches – the powder-coated finish. In terms of fitment and modification, I’d say it was a struggle worth going through. This bumper completes the shape and function of my truck as it ready for the trails and also looks stunning. I would recommend this product to all the customizers out there; for adventurous drivers, this is an amazing product!

This item came in the best packaging ever! Great deal for the money. (I wont know about installation till next week, but great value) OK, so we finally installed it, and it was a bit of a struggle, but I did not have to grind, cut, or anything other than try and manipulate the studs a bit so that all 6 studs would fit. (key is to make a template for the mounting bracket, and then bend the studs so they fit. (I used ratchet with socket on the nut added to the end of the stud. (we are talking micro manipulation, not truly bending the stud, only the mounting service. ) This will work for winching out of the ditch, or in the woods pulling logs, but I would spend the 500 plus if you were thinking of actually wheeling and using a winch to help you out. This is very thin steel, and will not hold if you were stuck in the rubicon, and needed to winch yourself up a big obstacle. This will work for what little I expect to have to winch, but again if you plan on using it often, purchase something that is going to become part of your frame. This unit will not support pulling that much weight with much resistance, but should hold if pulling you out of a ditch somewhere. I still give it a 5 out of 5 for the price. Lights work great.

This bumper is honestly the most inexpensive bumper I could find, probably cheaper than just a winch plate. For that alone, it is a tremendous value. It feels stout, I like the style, and there's no gaudy branding cut into it (I'm looking at you EAG). The hoop is a fat tube, and looks meaty (even though it's only attached via 8 small bolts). Cons... One of the d-ring mounts was welded crooked, so it looks kinda wonky, but with the shackle on it, it's not too noticable. The light tabs are a bit deep and low on the bar, so I'm unable to aim my Hella 500's down enough; I can probably correct with about a half inch stack of washers. I do wish there were some holes drilled into the tube to route wires, but I can punch my own. The package was pretty bad.. It was basically wrapped in felt and a 1/8" thick foam blanket, then cardboard wrapped around it (no airspace or cushioning). Amazingly, nothing was bashed in from shipping, but there were a couple (very minor) dents and scratched off paint on either side of where the winch mounts. No biggie, a dab of bed liner will hide it I'm sure. It doesn't come with nuts for the main mounting bolts, and I'm not sure if the factory nuts are compatible, but I ordered some from Amazon anyway (not here yet). But overall, I couldn't be happier with the value and appearance. I'm going to attempt to install onto a 2019 Wangler (JL), as rumor has it, JK bumpers are compatible. Will update when Amazon delivers the rest of my order. Edit: It fits JL Wranglers, no problem. There's maybe 1/2" gap between the bumper and the grille at the closest, so, no rubbing, looks like it was meant to be there. My Sport plastic bumper halogen fogs are the three-tab style, and this bumper takes the four tab style, so I had to drill a couple holes in the fogs to use them, but it worked out in the end. You'll need your own bolts to mount them. Hopefully there's no rubbing when the winch shows up.

You know that saying "You get what you pay for..." Arrived super well packaged, I mean I have purchase countless bumpers from the internet and this may be the best packaged one I have ever gotten. That is where the praise ends. Horrible welds. Blown out holes that were not fixed. The coating poured out of the packaging and all over my floor and chips off when you look at the bumper. The one really concerning item to me is that there is a gap between the front layer of the bumper and the mounting surface of the back side of the bumper, meaning you can easily over tighten the mounting hardware and deform the bumper and any impact would likely destroy the bumper. Would make a great bas for someone wanting to modify the heck out of a bumper.

Quality is light duty but with a few extra bucks in grade 8 hardware this is a very usable mount. I also added a 1/4" plate under the winch so the bolts dont pull through the light metal it's made of. I used it several times and a couple of them where hard pulls. The D-rings would be good for maybe keeping a Chihuahua tied up to the porch but just maybe. The mounts that the rings hook to are actually very very well made. I use soft shackles and they slip right through the holes. I opted to not use the over loop. It wasn't bad looking but sometimes less is more. If you have a budget and don't want to spend 600$ + on name brand that does nothing more than this can do this is your ticket. Very easy install. And the light holes all line up perfectly.

注文してから3ヶ月ですが届きません。 連絡しても返事はありません。 まぁまぁいい値段なので、返金して欲しいです。

Good for the price. There were marks through the finish from moving in the carton. Also where the fairhead for the winch attaches was bent a bit. Can straighten it. Need some better packing.There was rust dust on the hoop and in the plastic bag it was in. Coming from the holes for coating. Hopefully doesn't cause an issue. Haven't installed yet so not sure about fit.

I guess you get what you pay for. It looks good new however be warned, winter roads have rusted the whole front. This is under the textured paint. I assume cheap quality steel that was not prepped properly.

Parfait pour mon Jeep, mais rouille facilement alors j'ai du le repeinturer

The bumper arrived in probably the nicest packaging I've seen. It was wrapped in a nice blanket with a foam box all around it. The cardboard was damaged because delivery drivers seem to enjoy throwing packages around but the bumper itself arrived in good shape. For the price I don't have anything bad to say about it. The key is to manage expectations when purchasing a budget item. It's a great deal. If I had to nitpick then I'd change the quality of the bolts. Also there's no way to mount a license plate. The only actual spot I could put it is between the fog lights and even that's a bit tight as the plate will obstruct a bit of the lights. All in all for a budget bumper it gets two thumbs up from me.